HMM... let me see if there is any explanitives that can harness the magnitude of my severe mental retardation. Oh heres tad bit of whats goin on in my dome piece. First off I'm a hardened biggot of Archie Bunker proportions, my only interests outside of glass consist of saw blade paintings, womanizing, narrow mindedness, baseball and a primitive fear of the unusual. Actually I'm a marxist, thats right ladies and gents I'm a fucking commie, Lenin and Stallin are my all time heroes, it was all about liberating our comrades from liberty and free thought thus delivering them into an abyss of mind control and horror. But since the end of the cold war and the demise of the soviet union, I spend most of my time masturbating and idolizing Nancy Reagan. Nothing excites me more than rodeos and redneck fuckin honkies spittin' chew and ridin dumb fucking cows until their subservient wives burst with litters of imbred offspring. Thanks for lookin at my glass!
torchin since september 06.
This page has been viewed 6526 times
by 4303 visitors.
(Not including visits today. Stats updated nightly.)
|
24 sections plus mibby....tryin to experiment with different reversal variations, I got sick of doin the same old vertical stack wig-wags so I thought I'd try and change it up alittle. I like the way it turned out, my nipples started lactating the second the mouthpiece was done, its a 50/50 bowtie-wig wag from left to right or somthin....and the marble is turbo cobalt with fume n clear....got some neat colors....as usual i suck....blah blah blah. thanx, peace.
(12 images)
|
Small Smooth and Clean, just like my weeeeeeeeeeener, my weeeeeeeeeeeeeeener.
thanx for lookin.
(8 images)
|
Nothing fancy, just a lil bling. Really my first dichro work other than other peoples cane scrap I used for bridges. Thanx for lookin. bling a bling ding
(6 images)
|
quick sidecar, g'd up from the feet up. yay!!! funeral tomorrow!! I love funerals....RIP Jude. blah.
(6 images)
|
Somthin like that, about 10 inches tall, too a shit tizzle of sections, featuring the magna-dome 5000 this forced perk external stem thing dizzle crap bomb was fun as fuck to make, first time doin that 4-plex windowpane reballer crizzle. for shizzle the shizzles are off the hizzle bizzle. star milli by strobel, lion milli by taj (thanx mike) believe. chugggggz like tootle. (only an OG remembers tootle.)
thanx for lookin at me stuff!
y2n8
(17 images)
* Featured Page *
|
multi layer fumetech hammer bub, AP/warm yellow split honeycomb, some weird mib some weird kid made, an EA milli and a gold/silver fume fillagree bridge, lick nipples then twist. was thinkin this is only like the 2nd or 3rd ham-bub I've ever made. thanx cake
(12 images)
|
The coiled hamzo is 30+ feet of encased stringers and cane, the dicrosilicate hammer was a 6 inch piece of tube, i didn't have the sleeve so its stripe encased with 10mil clear. I wasn't even gonna post these but F it, killin time. thanx for lookin. -n8
(11 images)
|
been doing mass prodo still, but I'm going to start makin a small headpiece every couple days, going to concentrate on cleanliness and some new shapes, or at least some variables of ones I already do. I really like this lil standup dry, its only like 6 inches or so. The hammer is my first coilpot, 19 pieces of cane and then encased in 8mil clear and reduced, thanx for lookin, hope I'll be posting alot again soon. peace.
(12 images)
|
7 inch standup custom for a michigan fan. Hope you digggz it duuuude. 13 sections plus marble and M logo implosion thingadizzler.
My first time ever doing a "bing/tube" shape....thanx woot woot for all that woot woot.
(7 images)
|
it hovers, its magic. 13 tube sections + 2 coilpotted sections and solids. It rests on the two filagree horns on the bottom, allowing neither the moutpiece or the can section to touch the surface, from some angles it looks as if its hovering....oooooooooh.
ar... ackackack. Imma glue ya nuts to ya dresser ya ya glue ya nuts to ya dresser and bang them shits with a spiked bat, wu-tang forever mothafunkas! tanx mahn! peaces.
Yet ANOTHER person in my life just passed away, R.I.P. Heather Mowbray, you will be missed. I wish I could've had a chance to say goodbye, I'm sorry, hope the afterlife is ultimate paradise compared to what you were going through on earth. I'll never forget you.
(9 images)
|
Got a camera!! wooohooo! been a few weeks since I posted a couple bubs came and went without pics...but here's 5 pieces I've made in the last 2 weeks....
#1 Turbo Cobalt,orange,yellow,white,... port grey. 20 sections.
#2 & #3
Carlson suggested to me a few months ago to make a few clear bubs. I did make a couple solid clear ones and I liked em enough that I decided to do some clear with simple reversal work. This project helped with cleaning up seals and a clean downstem area, with nothing but clear you cant hide anything, thanx chris.
#4 Amythyst tube with gold and silver fume trap reversals, love the colors woot!
#5 Coilpotted Chinese red with a lil warm yellow and amber purp encased with clear. also neat colors.
And a super sexy pic of myself a friend took while I was cameraless, I kept this bub.
Thanx for lookin!
(22 images)
|
Small gold n silver fumebub and some hammers with wag-ties and rewigs, fun reversal practice, posting this to kill time till last nites bub gets done coolin off....thanx for lookin. y2n8
(17 images)
|
36 tube sections deep. Randy made the killer whale and the hearts attachment and what was a rose a few months ago, once resting peacfully on a shelf the jolly green doug knocked them off onto the floor, so the sprout on the back is a branch off what was a rose and the heart attacment thing is minus one tendral. Damnz. If i had made those attachments I wouldn't have explained any of that shit. But for some reason I felt it necassary.
the whale is life, the hearts are death, the sprout is new life. Cha-CHing! gimmick sold.
been doin mass prodo this felt good.
I need to get a new camera bad as fizzuck I took like 30 pics and these were the only ones that werent just a pure black/blank .jpg. lameness.
thanx for lookin.
(8 images)
|
25 sections of super sexy satanic sweetness. I made the can a couple months ago when Randy was here, this was gonna be the "hate" bub, Randy's attachments got knocked off a shelf in my "office type room" and broke so I decided to change up the theme but still keep it all angry like....this thing was super fun to make, I think I like bubs with a "theme" type deal....anyway I'm pretty stoked on the way it turned out, nice and morbid lookin....
Influences include SATAN, old death metal like Obituary, Deicide and Cannibal Corpse. Also drew some influence from a hammerbub Dosher posted a few months back, shield was like a pitchfork with some crazy shit and ill ass little symbols n shit, i think it was pretty much the same colors as this, I can't remember.
Mass energy.
Thanx for lookin.
Respect.
(16 images)
|
29 section sherlock bub. 13 section dry hammer, 4 section gong bowl, 4 section jar and 5 section pocket spoon. My first "full" set, that is more than 2 pieces. Was hella fun to make, I was smiling the whole time I was sweatin' this bub was the butterzone baby!
Almost finished with our new shop!!! woohooooo! pics of that comin soon. Until then its back to the prodo grind to finish payin for the new shop....2 sides to every coin. Insert whip cracking sound effect here. Back to Work!!!
thanx for lookin -y2n8
(22 images)
|
Forced Perk, 9 1/2 inches, 28 sections + solid attachments, this is going out on a limb but I think the shield is the only time I've seen this particular re-ball configuration.
blah blah I suck ass
too much prodo as of late.
The flux capicitor is the device which makes time travel possible. 88 spirals per hour is the speed at which time travel takes place. Wow, I'm a fuckin lame ass.
thanx for peepin.
(15 images)
|
The wet stuff Two-thousand-and-Nate.
(23 images, 8 sub-pages, 12 comments)
|
Thanx for lookin, and happy
TWO-THOUSAND-AND-NAT... shizzle from this yizzle.
(14 images, 3 sub-pages, 7 comments)
|
standup bubs have paid off well but now I'm bored and old...self appointed judges judge more than they have blown....serve the sherlocks oh no.....serrrrve the sherlocks wannnnnnnnnnggggg.
21 hollow sections + all the horns and mib n shizzle dizzle. This was way outisde of my box, where I plan on building my new box.
It chuggggggz like a mofo.
Big ups 509er's! Ya'll be the shiznat. Endless thanx to Royal, everytime I work with you everything gets alittle easier.
Thanx for lookin! -Y2N8
(19 images)
|
2007 2007 2007 2007 2007
All my work from my first year on the torch. This is the longest I've stuck with anything in my life other than music and a girl I don't like.
2007, my rookie year. Wow. What a fucking trip this is.....I finally figured out what I'm doing with my life.
Thank you to everyone with molten boro flowing through their veins in place of blood.
(1 image, 2 sub-pages, 4 comments)
|
Slumped shit, Shop Pics, Pit Bull Pics. Etc.
(7 images, 4 sub-pages, 2 comments)
|
Art Show, dumpster diving and dollar bill fishing in downtown sea-town, woot woot!
Hopefully next year I can stay longer.
A bunch of shizzle for shizzle.
(136 images)
|
|
|
Success is a bad teacher, it seduces people into thinking they can't lose.
torchin since september 2006....
Instant message me through AIM add FakeNate069@hotmail.com
messages logged 24 hours a day.
http://www.myspace.com/fakenatesglass
|
|
Comments on This Gallery Page
|
give thanks
Keep up the work yourself.Blow as much as u can.Looking forword to seeing progress in all works.Keep your head up....
» Posted by
ChadG
on 1/15/2007 6:39:39 AM.
|
B & W
i use jet black by precision.
» Posted by
ChrisCarlson
on 2/4/2007 9:31:08 PM.
|
Thanks
hit me up if you have any questions
» Posted by
LiquidEarth
on 2/7/2007 2:39:17 AM.
|
crazyness
thanx for the info on the green!
» Posted by
Sleepa
on 2/10/2007 12:35:11 PM.
|
thanks for your comments
yea i just started my gallery last night so im glad to see someone looking...oh and your well on your way so keep that flame going!
» Posted by
Sleepa
on 2/10/2007 12:50:28 PM.
|
Stoked
Thanks for the comment on my stick stack...oh yeh guess what that thing you wrote the other day about how your emotions effect the cryctallazation during fumeing that you were talking to Bob with, well i printed it and put it up at the shop i think its cool as hell, i always knew i just wasent sure but i always did and do feel that every thing is effected by your spirit from the second you turn on the torch to the end product, and that also is (I THINK) a nother amazing property to this entety we call glass...peace out... keep up the good work ...
» Posted by
XL
on 2/23/2007 3:03:10 AM.
|
Fuckin comedy cuz
Pretty hillarious profile cuz. Check out my band you might dig it. myspace.com/thehoundsmusic.... Thanx for the comment . Keep rockin the funny side of life!!! Too many people over on the other side. Good to see someone on this side it all..Jordan...
» Posted by
SheepdawgGlasscraft
on 4/23/2007 10:14:31 AM.
|
yo
fume up some flat rod, encase, and twist all crazy like. those are the easiest marbles i make.
» Posted by
JMadden
on 5/10/2007 10:12:01 AM.
|
yo nate
Hey that a good tip but step by step pics will be wonderful. Appreciate your time!!!!1
Good vibes from costa rica!!!1
» Posted by
Tassara
on 6/1/2007 7:34:08 AM.
|
<><><>
Thanks for the comment.........Haven't posted in a minute....I see your steppin up...keep it flowin<><><>oneness<><...
» Posted by
ChadG
on 6/7/2007 7:20:01 AM.
|
yo yo nate
thanks for the comment on my page bro! nice to see yer goin big latly too. not bad kid! I'm coming up on my 3rd year of torchin and basically 1 year since I started doin heady glass. each post ya put up gets better and better. nice stuff bro, sure it'll only get nicer!
peace,
Dave in NH
» Posted by
Rnsga
on 6/22/2007 6:00:42 AM.
|
Shitty hairy butt.....rock.
Because their slogan is "Gettin better every day" Im not a fan I just thought it would be good for a laugh. By the way, Im also in a knundrum. Because of this knundrum I cant get out of the knundrum of being in a knundrum. Im in a knundrum. Howd I get in this knundrum? Im in a knundrum. knundrum.
» Posted by
Earthling
on 6/24/2007 10:25:55 AM.
|
conundrum
» Posted by
Earthling
on 6/24/2007 2:49:08 PM.
|
<><><>
Hey I can't carve worth a shit either...Find someone who has some skillz...If you have no luck, when I got the time i'll have my bro make one for ya........<><><>oneness<>...
» Posted by
ChadG
on 6/26/2007 9:07:32 AM.
|
foot pedal
you comented on my foot pedal,then i was wondering if you did not understand how it worked. you seemed concernd for me or not but this is how it works. there is a magnet that opens the valve when a little 12 volt curent is directed to it. same as a car battery. looks very un safe na!!!!!
» Posted by
JRED
on 6/29/2007 6:51:13 PM.
|
...
thanks for the comment man, glad i could be of some inspiration to get you on the torch. i told mike next time he comes out there to take mewith so i can meet the man behind the glass.
» Posted by
Royal
on 7/11/2007 7:21:40 PM.
|
super unob ?
yo dude thanks for the comments.with any sparkle color i use a high oxy flame. and never kiln over 1090.(same for greens) i also try avoiding encasing in too much clear, or just use it on the surface, and burn off the red.
» Posted by
kidO
on 7/11/2007 10:41:39 PM.
|
Heyas thanks for the comment.
Sure I'd be up for some colab when you're down this way, sounds like good fun. My roomie is a glassblower too (considerably better than me), I'm sure he'd throw down as well. I should be raging a Barracuda by then, and my roomie and his GF have a couple of Red Maxes, plus several kilns between us, we should be able to set something up.
Going to hit you up on myspace, add me back and keep in touch!
» Posted by
Nemesis
on 7/14/2007 4:34:16 PM.
|
...
buy some dichroic alchemy dichro. its really easy to use. my friend had some cbs dichro awhile back and i found it to be much harder to use, could just be me though. the DA starship tical seems to be a pretty easy one to work with. i usually take a a small section from a strip of dichro and encase it completely (non-dichro side and edges too so it stays thick) with 4mm clear. then i encase it again on the dichro side. once i have that, i'll get it all melted in good before i back it with a color. if i'm making a galaxy, i'll twist it up while its pretty floppy so it doesnt trap any air bubbles. thats how i do it, hope it helps...just dont get it too hot. when you are heating up your rod to encase, make sure its not too molten or it scorches the dichro right when it touches. patience is key when it comes to dichro...
» Posted by
DEW
on 7/15/2007 5:35:12 AM.
|
....
i got a chunk of that dichro tubing left that would be just enough for another piece like that. maybe when i get back ill have to bust one out. yea that green tubing can be weird, mike gave me a chunk but all my shit turned out. could be luck.
» Posted by
Royal
on 7/17/2007 1:48:22 AM.
|
+++++
you can buy the tubing with it sprayed on clear tube or cobalt tube, cobalt is the only way to go i think, pre backed.
» Posted by
Royal
on 7/17/2007 10:36:05 AM.
|
overspin the disco on the swipe............
warm in kiln first.................peace out.............
» Posted by
BlueGlass
on 7/18/2007 12:13:04 AM.
|
,,,,,,,,,,
hey me and mike and bergin got booth space 616, right next to you, should be fun. thats crazy, its 3 in the morn, call mike if you get this soon, thats what he said.
» Posted by
Royal
on 7/19/2007 2:52:47 AM.
|
welll
if you want a quick run down, prep your bridge to the exact size your going to want it by holding it next to your piece then touching up if need be.....when ready to attach, pre heat both ends of bridge and both spots on the piece where the bridge will go, maybe get your first connection point hotter than the 2. then slap on and hit up you first connection point first then back to the other and back and forth till all is melted in, make sure its melted in all around both connections, that might be your problem. try and do it all at once dont do it half way then throwit in the kin and try to do the rest, im guessing your connections are melted in all the way though. never seen in person but thats my guess.
» Posted by
Royal
on 7/21/2007 12:07:21 PM.
|
no, I dont know whats up. The link worked in the message you sent me, but when I cut n paste it did nothing. so yeah you dont gotta trouble yourself with it but thanks anyways.
» Posted by
Earthling
on 8/1/2007 1:15:59 PM.
|
nice work..
hit me up at my space dot com krossin studios keeps it HOT. peace
» Posted by
StudioK
on 8/10/2007 5:47:29 AM.
|
2
oh shit i so know the feeling of fiending for some glass only to be broken like the final result.
shitty that you guys have a lot of imports... but think of it this way... the only glass at boston hempfest is the 1 booth a year selling import shit (my friend got one, broke it and the lines weren't even fully melted in!!!) but these people get so much shit stolen from them every year, so karma gets them a little... really badass you sold everything, def. something to be very proud of.
» Posted by
DavidMakalaster
on 8/22/2007 1:04:52 AM.
|
3..
there is prob only one vendor because boston hempfest is just stupid... it makes the cause look more like a joke and people are arrested all over the place... some dude even asked a friend of mine and I if we'd want to make some "movies" with him.... seemed like a child rapist (i was about 16 at the time)... actually, come to think of it... there was another vendor selling trash beads, and one more sketched out as could be selling pipes in a hidden booth... but yea, boston hempfest.... ha pathetic... i was going for the train ride (they let everyone start the fest on the train) but last year they didn't even let that happen... seems to get worse and worse each year, but i still go for the hell of it.
» Posted by
DavidMakalaster
on 8/22/2007 9:25:54 PM.
|
Its one of the best feelings ever. Almost overwhelming, get all your glass in order and then "what am I going to make first?" Rage it up.
» Posted by
Earthling
on 8/23/2007 8:04:01 AM.
|
re. headford
hey thanks bro. ive been workin for a few years making pipes, but made tubes before that for a few years so like 7 years altogether. thanks for checking out my stuff.
» Posted by
Headford
on 9/3/2007 1:05:34 AM.
|
nate try to make tube pulls
Pre cut the rods 2 and a half inchs long or just 2 " them clamp them over a tube i use 16 color rods on a 1" tube them punty up to the other side of the color rods . try to make your punty extra big with 1 and 1/4 " tube. after you punty up have a big clear section ready to go. slide it over and brige up the bottom. then start melting from the top down keep it straight and blow it out and condencing it 3 to 5 times. Pull it good and straight and it will work just like clear tube, all most by the time you work out the tube and make it into a section it will be perfect do it bro good luck. PEACE BEAN
» Posted by
Mr.LandsHeadyGlass
on 9/9/2007 6:05:53 AM.
|
Yo
School is going fine.Iam working in some pieces show u them later when finish.
Keepit up!!!!1
Looking foward on those pieces!!!!
Peace!!!1
» Posted by
Tassara
on 9/11/2007 10:59:45 PM.
|
####
just let me know when you want to schedual somethin, im down for it anytime.
» Posted by
Royal
on 9/17/2007 10:11:06 PM.
|
stemless advise,
Thats a tough one. Plan ahead, Make sure your stem has a chamber bigger than the ammount of water thats in the piece. Look at a ton of other peoples works. Thats all I got, oh practice.
» Posted by
Earthling
on 9/20/2007 6:58:58 PM.
|
HEY BUD
had not seen your stuff for a wile your looking real good, keep up the good work...Ps. I like the colors your putting together...
» Posted by
XL
on 9/26/2007 4:09:38 AM.
|
Thanx for the intel
Thanx for the intel on the page politics. I'll try that flame adjustment next time i'm in the shop.
» Posted by
PurplePassionGlass
on 10/3/2007 12:10:26 AM.
|
...
dyude call me and tell me hata up up, bbq is always top priority.
» Posted by
Royal
on 10/5/2007 10:29:22 AM.
|
yup
not sure how I got into the top 100?! but yea, it is bad ass! I would have never looked. thanks for the heads up! Nate you ever go the the eastcoast(NH here) at all? If ya do look me up. I might be coming to that area next spring/summer... I got a buddy in Olympia thats wants me to come hang soon. keep up the flaming kiddo, yer progression is
SA-WEET!
» Posted by
Rnsga
on 10/6/2007 12:12:06 PM.
|
Very nice!!!!
your work is nice as well.Keep rockin it!
» Posted by
Chachi
on 10/21/2007 10:22:44 PM.
|
nice stuff man^
killin' it! keep it up!
» Posted by
Dickey
on 10/29/2007 12:26:01 AM.
|
yea yea
If I'm ever out yer way, bet yer ass I'll collab up!! I gotta bro in Olympia that I gotta go see here soon enough. He got me started in the headier glass, super chill kat. thanks for the comment kid!!
-Dave
» Posted by
Rnsga
on 11/2/2007 2:13:30 PM.
|
Thanks cuz!!!
Dude your gettin way better bro!!! nice work...Way to keep up the positive glass workin!!!-Jordan...
» Posted by
SheepdawgGlasscraft
on 11/2/2007 7:45:39 PM.
|
naw that cane is all straight lines, onyx and one stripe of red, encased twisted then toungston raked. thanks for the compliment.
» Posted by
Earthling
on 11/3/2007 9:55:34 AM.
|
M V
mntVernon is western washinton just south of bellingham 30 miles or so If you over this way hit me up
» Posted by
WIERDEER
on 11/5/2007 7:03:02 PM.
|
yeah that fucko tim!
he's cool most of the time but sometimes it's 5 accross the eye!lol your shits pretty dope dude way to rock the redmax I do the same YEAH!
» Posted by
Chubz
on 11/8/2007 6:16:41 AM.
|
dood # 100 check you out
last on the list but on the list too cool for you
» Posted by
WIERDEER
on 11/10/2007 12:01:11 PM.
|
^^^^^#100
yea yea what he said! congrats kid!
» Posted by
Rnsga
on 11/10/2007 12:52:30 PM.
|
^^^
you earned it! i have a canon sd800 that was about that price, i have taken most of my pics with it...
» Posted by
ChrisCarlson
on 11/10/2007 8:01:20 PM.
|
I'm around! I moved up into the mountains of colorado back in July...just got the shop up and running within the past month or so. Been making a lot of pendants, so not much time for pipes...but be assured that when I have them made, I'll certainly post them! Your stuff's looking good! Keep it up!
» Posted by
SatoriGlass
on 11/11/2007 8:53:44 PM.
|
millie
actually that is the first millie I made its one that I made like two weeks Ago. As far as the tech goes yeah I got like 75 more grams to go but I'm sure I'll use it
» Posted by
WIERDEER
on 11/13/2007 4:47:47 PM.
|
Its all gravy.............
I like your site, keep working hard.
» Posted by
Lawdawg
on 11/15/2007 10:33:05 AM.
|
God I love Testla
Fuck! I have become too unmotivated to post. No human sized stemless. Maybe midget sized. God I love midgets too. (oops...vertically challenged)
I do mean it when I cay congrats. You didnt get it for no reason.
» Posted by
Earthling
on 11/16/2007 3:53:51 AM.
|
spokompton
now thats funny.
If you wind up making it happen and youre feeling froggy youre welcome to crash here for a night or two. Colab?
» Posted by
Earthling
on 11/16/2007 11:56:34 AM.
|
i am assuming you use borostix white
i havent thought of running into that problem. ive noticed it when ive tried to do sections with clear windows. i wonder if star white would make a difference
» Posted by
HeinousGlass
on 11/21/2007 7:28:42 AM.
|
I got mine off e-bay for like $40. so you might want to check out the online options before standing in line with some over weight ugly single moms and their little crumb crunchers.
» Posted by
Earthling
on 11/22/2007 9:46:18 PM.
|
your feet will thank you. Then you can focus on your work instead of your feet.
» Posted by
Earthling
on 11/23/2007 2:42:28 AM.
|
///
Good to hear back from ya Nate. And thank YOU for the kind words. Keep at it man. You're stuff's looking great for 14 months. You've got a good, humble attitude too. Between that and your determination, you'll go as far as you want. Keep rockin' it!
» Posted by
DaddyO
on 11/23/2007 8:55:12 AM.
|
thanks alot
its cool for me to watch you improve and shit along with me
although
youre doing way better than me
imma catch yo ass though
» Posted by
Meta
on 11/25/2007 12:33:58 PM.
|
thank you
and will do!
» Posted by
StoneCutter
on 11/25/2007 5:43:56 PM.
|
thats so sweet
you noticed. I really didnt want to post some bullshit to have it featured. I really do think this one was worthy. Thanks for the feature *click*.
You get your boots yet?
» Posted by
Earthling
on 11/26/2007 11:24:35 AM.
|
Good, I hope the boots are treating you well.
Reggae rising is so close to me. I have a side job in ukiah which is 15 min from the sight. And my house in forestville is about an hour from there. So yes Im down. Or even just to kick it.
» Posted by
Earthling
on 11/27/2007 12:45:51 PM.
|
Oh, and that piece is..Im guessing cause its been 8 or 9 months since I made it. In the stand its like 9-10" tall, 6-7 front to back, and 9-10 side to side. That base is a huge chunk of solid. I worked mucho hard on it.
» Posted by
Earthling
on 11/27/2007 7:23:11 PM.
|
In all honesty I'm not a festy kind of guy. In fact Ive never been to one. The real truth is I cant afford to dedicate 3 days to partying and stuff. I just cant. I feel like if I were to try to sell glass there I couldn't make anything too nice because everyones money is tied up in food water and drugs. Mine would be anyways. Also I would lose my mind being subjected to 3 days of non stop reggae. Dont get me wrong, I like Reggae, just not force fed down my throat. And I don't trust hippies. Just a few pre-conceived opinions. Although I have heard a few arguments against my case, so maybe I should look into it.
Right now I only have a 2 station shop but I think we could make it work. Weve got time to figure it out.
Dude I came across this thing you said that I can really relate to,
"if you ever meet me you'll be like wow, that guys a complete nervous wreck on the verge of a complete psychotic episode. I'm not confident yet, actually i reduce myself to tears, sweats and shakes when i do a piece like that"
So my life story. Ive had days just so frustrated Tearing my hair out, head in my hands, throwing glass. Basically a temper tantrum. I really had to take a step back and ask myself weather or not I could realistically do this. Its a every day hustle man. Keep your pimp hand strong.
» Posted by
Earthling
on 11/29/2007 2:30:33 AM.
|
True that. There always is a flip side, and it really is dependent upon the person. Maybe I shouldn't be so judgmental. In reality the majority of my friends are hipped out. I just dont trust anyone who gives me some fake ass name. It seems like a cover so when they rip you off you wont be able to track them down. Im a biggot.
Yea, see, I couldn't imagine it being like that. Now that I think about it, they wouldn't have festys if they wernt profitable. (from a business standpoint) I guess there are ballers cruising around the scene. If thats really whats up then maybe Im missing out. Even if we dont get to make anything Im down to party with ya.
» Posted by
Earthling
on 11/29/2007 4:42:40 AM.
|
^^^
word, one of the best things i learned is,don't use stuff your not stoked on... be realistic and ask yourself if it will make the piece better. throw it on your prodo.. use the best for your headdies.
» Posted by
ChrisCarlson
on 11/29/2007 9:32:03 AM.
|
And you know this
» Posted by
Earthling
on 12/7/2007 2:06:23 AM.
|
thanks nate
do they taste like ketchup too?
» Posted by
Earthling
on 12/7/2007 12:42:34 PM.
|
Hey Man
You crack me up... Love the description on the PurpInYoFace... Sux about that color...
Keep at it... I need the motivation of something to work towards... Peace
» Posted by
PurplePassionGlass
on 12/12/2007 3:03:57 PM.
|
thanks
apreciate the comment thanks for lookin all your stuff looks realy good keep doing wat your doing cause its working
» Posted by
L-D
on 12/22/2007 8:08:20 PM.
|
fillherupachello...................
should be the new name for dat shit.......naw i was just feelin loopy..........to much oprah........ha...peace happy fuckin xmas........
» Posted by
BlueGlass
on 12/24/2007 9:05:04 PM.
|
I have no clue of what you just said. But you touched a brothas heart. Dude, in San Francisco minimum wage just went up to $9.36! I may as well quit and go work at McDonalds. And what is all this woot talk? I hear its now going to be added in the dictionary. What is woot?!
» Posted by
Earthling
on 1/3/2008 3:17:28 AM.
|
"Hustler of the year"
Nate thanks for the positive feedback yo.
Your pieces get cleaner and cleaner so your doing it right. peace
» Posted by
AndyD
on 1/3/2008 1:52:57 PM.
|
Thanks cuz!
Took that picture over 15 years ago...My hommies and I staged that shot...We were big into stunts and shit back then>>We used to stop cars and shit with our antics!Ahh the good ol' RUDE BOY days!...Now they just arrest your ass for being a public terrorist!HaHa..Great work lately by the way bro!!Your gettin tight hommes!Happy New Years ,-Jordan
» Posted by
SheepdawgGlasscraft
on 1/6/2008 3:38:31 PM.
|
THANKS
Thanks bro that's my second try at that I think that's what they call bitch window I'm not suRe thanks again
» Posted by
Lear
on 1/7/2008 2:03:29 PM.
|
THANKS...
Hey u know how to do those right if not let me know ill explain how to do them really easy and just wait till u see what I finish up today its one u inspired me to do I feel its my best work to date took twice the time and twice the work I usually do ill try and post it tomarow if I can finish it up today thanks again mang
» Posted by
Lear
on 1/9/2008 12:06:38 PM.
|
Thanks
Thanks for the feed back on my crackin issue! Keep the shiz fuzing hot! Oh ya not to blow your head, but your work is sick, and only two years!!! Mad respect. Denots507
» Posted by
Denots507
on 1/10/2008 1:01:56 PM.
|
tHANKS MAnG...
Hey I'm puttin the other pics up right now like 3 good ones didn't upload the mouth bowl and base I put a reversal section man now that's a bitch
Thanks again
» Posted by
Lear
on 1/11/2008 12:02:42 PM.
|
PUTEmUP...
Got those other pics up check it out now
» Posted by
Lear
on 1/11/2008 1:40:48 PM.
|
pyrokilla
no i kill people with fire
» Posted by
Pyrokilla1234
on 1/12/2008 8:46:04 PM.
|
WiCKey
Hit me up at........check yur AIM
» Posted by
EM
on 1/13/2008 3:34:15 PM.
|
Word~
Nice comment list! I used to make Lego spaceships too! I guess it was meant to be:) Keep workin you'll be there sooner than you think~
» Posted by
Eusheen
on 1/15/2008 6:48:06 AM.
|
!
working glass is not only one of the most frustrating things ive ever done, it is one of the most ZEN. while you have time off with your dental work, try reading some books by or about the Dalai Lama,,, might help with the zen aspect of not being attached to your outcome, to just live in the moment...i used to smash alot of pieces on the sidewalk my first year or two, it gets easier to deal with after much practice in failure :)
» Posted by
Slinger
on 1/16/2008 1:10:14 PM.
|
Yeah i laughed
My fuck fluoride was partly inspired by that. Also...you spelled my name wrong! If youre going to say fuck me the least you could do is get my name right. ass.
» Posted by
Earthling
| | |
