|
Images
|
small dry AKM put together then i sand blasted and electroformed...enjoyed the collaboration; hopefully the first of many!
(10 images)
* Featured Page *
|
|
round two of small collabs with AKM. he made the piece then i blasted and elecroformed it! thanks for looking....
(12 images)
* Featured Page *
|
|
this is a collab between akm and myself made last month...i know andrew already posted it, but man i just had to have it in my gallery too! this has been one of my favorite collaborations! thanks andrew for working on this with me!
19 inches tall 9 inches wide 6 inches across the back
(23 images)
* Featured Page *
|
|
this is a collab between AKM and myself. stands 24 inches tall with an obsidian knife on the back. it has a three hole disc perc and a detachable feather... also comes with a three hole shrink perc ash catcher.
(9 images)
* Featured Page *
|
|
i made this three piece set last month. sculpted antlers with other worked sections and then electroformed. it has two dry pieces and one vapor dome three hole shrink perc that stands 17 inches tall.
(10 images)
* Featured Page *
|
|
some recent bipolar work including some slides, dome tops and a bubb. mostly patchwork on the inside blasted images on the outside! been having a lot of fun with these. thanks for looking...
(19 images)
* Featured Page *
|
|
the original version of blue dream. made the piece three weeks ago. electroformed copper on the slide(14mm) 2 weeks ago, but didnt have enough solution to plate the bubb. ordered up more and finished the bubbler. used onyx, butterscotch, and mixed peacock/ aqua azul/ boro white together for the blue. added a dream catcher with turquoise beads, and a piece of quarts. movable marble on back, and used moldavite left in its raw form. layered copper effect on bottom of can! stands about 13 inches tall. really enjoyed messing with the electroforming process;thanks for checking it out...
(16 images)
* Featured Page *
|
|
so here's a little bubb i put together. added a dream catcher, some turquoise, quarts, and some moldavite left in its raw form. thanks for checking it out....
(8 images)
* Featured Page *
|
|
broken arrow upline with matching onies and hot stick...
(13 images)
* Featured Page *
|
|
broken arrow onies and a dream catcher chillum!
(15 images)
* Featured Page *
|
|
14mm gong bubbler with a dome. it about 12 inches in length. used onyx, triple passion, burnt orange, and butterscotch.
(8 images)
|
|
Recent batch of collabs from Carver B and ETR... Had a blast working on these with Andrew! Hopefully the first of many... The Sacred Pipe can be found currently on display at The Glass Stache in Northern VA.
(18 images)
* Featured Page *
|
|
from 2007
(3 images)
|
|
from 2006
(4 images)
|
|
from 2007
(6 images)
|
|
a bubbler and a dome percolator stands about 14 inches. used amber purple tubing and rod with clear.... thanks for checking it out!
(8 images)
|
|
small five inch percolator. used onyx, butterscotch, agua azul, boro white, and indigo aventurine. thanks for looking...
(10 images)
|
|
some recent drys i've blasted up...been having fun with the new toys!
(19 images)
* Featured Page *
|
|
this is a piece i put together for a friend. used boro white, cherry, and onyx. thanks for looking
(5 images)
|
|
heres a inline/ dome/ natural perc i put together then electroformed....added a purple patina.....
(10 images)
|
|
heres a bubb with a weave section that i electroformed as well....stands about nine inches
(8 images)
* Featured Page *
|
|
more of my antler themed pieces: an obsidian blade antler handle knife with sheath, some smaller peace pipes, an ash catcher and some slides...having a lot of fun with this series....most of these pieces are available at Green House Glass in Richmond, VA
(20 images)
* Featured Page *
|
|
While hiking through the forest i stumbled upon an elk antler just off the trail. So I fashioned this pipe from it, and gave thanks to my fallen elk brother who donated his antler....
(18 images)
* Featured Page *
|
|
The peace pipe serves as a portable altar. Used in every ceremony and used to communicate with the creator. It is sacred to the people and should be considered as holy as the church....
(20 images)
* Featured Page *
|
|
all you need is a good knife and a decent pipe....the universe will provide everything else!
(15 images)
* Featured Page *
|
|
heres a little zombie head inline ash catcher i put together. then g-check made the zombie hand slide...
(15 images)
* Featured Page *
|
|
spoon with a face. really enjoy making these faces. this piece is about 2 1/2 inches. used butterscotch, teal, boro white, agua azul, and blue moon tubing. thanks for checking it out.
(12 images)
|
|
something new for me; my first face ever! its 1 1/2 inches tall and the whole piece is about 10 inches. used amber purple tube with butterscotch for the face. had a good time making this one. looking forward to trying more faces in the future.
(21 images)
|
|
from 2003 First nice piece I ever made. Its the only one I've held on to.
(10 images)
|
|
a custom frankenstein style slide for a friend... been working on my sculpting and im quite pleased with this one...hope you guys like and thanks for peepin...
(5 images)
|
|
i made the graal section in a Robert Mickelsen class with special guest teacher Slinger...thanks guys! then returned home and made this piece. i electroformed some copper over turquoise and quarts. then slightly aged the copper...cant wait to explore this technique more! thanks for checking it out
(10 images)
* Featured Page *
|
|
another graal section from a mickelsen/ slinger class! brought it home and finished the piece. used some stones: amazonite from moorefield mine in amelia, va, quartz from arkansas, and turquoise from arizona. electroformed it and gave it a green patina. had a lot of fun with the techniques! thanks for checking it out....
(12 images)
* Featured Page *
|
|
I'll make the weapons to fuel the Roots revolution...
(12 images)
* Featured Page *
|
|
Glass Munky came by Influence Glass Studios in RVA a couple weeks back and we put together this collab! Had a blast and thought this was a good mix of both our styles.....thanks for throwing down GM!!!! we need to get some more going in the near future! stands about 18 inches tall...
(7 images)
|
|
a double inline with a skull perc hops and akm put together, and i did the sand blasting. then akm and i electroformed it together.
had a lot of fun with this one...special thanks to hops and akm!
(17 images)
* Featured Page *
|
|
its a triple bubb...the inline, the dome perc, and a natural perc on the back. used boro white, burnt orange, and onyx. stands about 14-15 inches tall. 18mm gong slide. had some fun with this one...thanks for looking.
(9 images)
* Featured Page *
|
|
been a while since ive been on, but heres a bubb i electroformed then i added a couple of dream catchers and some quarts...
(13 images)
* Featured Page *
|
|
This is a collab between Left Coast and myself...I made the coil section and slide and Basho put them together! This is one of four we made with Inuit blasted images. Two of them made to Vegas this past trip even though I didnt! Really enjoying these!! Thanks Michael, Caeser, and Basho of Left Coast for working with me!
(8 images)
* Featured Page *
|
|
so heres a bubb i put together...blasted Pocahontas in her english clothes on front, on the back is a scene of her saving john smith, and on the mouth piece is the county seal with a modified version of Pocahontas. who happens to be a distant relative. just a small tribute piece...thanks
(13 images)
* Featured Page *
|
|
little tube 11.5 inches tall
(8 images)
* Featured Page *
|
|
here a few custom pieces for friends....a hand spun tube to match the frankenslide, a bubb, a spoon and a slide...started working on some flips....
(20 images)
* Featured Page *
|
|
this bubb stands 16 inches tall. sand blasted with a navajo rug design.
(14 images)
* Featured Page *
|
|
antler themed dome and nail natural perc with 3 single hole shrink percs...blasted with elk skulls! about 15 inches long.....thanks for lookin!
(17 images)
* Featured Page *
|
|
another spoon with a face...used onyx, peacock, and butterscotch. then did some electroforming with it. just getting started with electroforming, but looking forward to exploring it more. did a slide last week. will post it as soon as i plate the bubbler that matches....cant wait...
(10 images)
|
|
heres a little dry with an owl blasty...stands about 6 inches from the mouth piece
(8 images)
* Featured Page *
|
|
little double layer over a weave section. had fun messing around with these techniques...
(11 images)
* Featured Page *
|
|
hand spun mini tube stands 14 inches tall. blasted with medicine wheels and electroformed with some quartz crystals. also included are a few pics of some double layer sleeved graal slides ive been working on...
(22 images)
* Featured Page *
|
|
heres a little hammer bubb i put together...blasted some northwest native mask on the side, and added a couple of facets. really liked the color scheme with this one...
(11 images)
* Featured Page *
|
|
stands about 10 inches tall. the side disc has a native american medicine wheel blasted on it, on the back a dream catcher with turquoise beads and moldavite attached, and a piece of coral busting through the copper on the other side! thanks for looking....
(17 images)
* Featured Page *
|
|
simple bubb i put together. used onyx, peacock, and butterscotch. stands about 8 inches. thanks for checking it out.
(15 images)
|
|
this is one of my first post since GP updated there site a while ago! for some reason my photos weren't uploading, but its good to be back...
here are a few di shrink percs. some of the pieces ive been working on over the past year. the full size is about 12 to 14 inches, the mini 9 inches, and the micro is about 6 inches long.
(19 images)
* Featured Page *
|
|
from 2008
(9 images)
|
|
a simple spoon with a little electroformed copper to it. still getting the hang of this technique, but loving it....
(9 images)
|
|
a few slides ive been working on over the past 2 weeks in between other projects! some electroformed, and some blasted....sending two of the awol one slides to awol himself!! there would be more, but had to trouble shoot my printer this week...thanks hope you enjoy!
(17 images)
|
|
from 2006
(3 images)
|
|
another spoon with a face. its about five inches; used butterscotch, onyx, and cherry.
(5 images)
|
|
heres a couple of tube collabs between Stone Glass Works and myself. two waffle diffused tubes with traditional Japanese wood block prints blasted on em with some electroforming... had a blast with these images and wanted to thank Preston again for working these with me! we got to get down on some more soon bro...
(20 images)
* Featured Page *
|
|
another teapot peculator, really enjoy these...this one is 14 inches tall w/ a tea cup jar and a sugar spoon...
(16 images)
* Featured Page *
|
|
im a little teapot..... made this guy and really love the shape! has a basket perc in the bottom and a japanese tea ceremony blasted on the side....stands about 10 inches thanks guys!!
(8 images)
* Featured Page *
|
|
So its been a little while since I posted; I've been preparing for AGE this spring, but I thought I'd log in and check out the new changes to the site. This is a piece I plan on taking to the show. Looking forward to meeting a lot of you and catching up with some friends!
This hand spun tube stands 14 inches tall. sand blasted with an elk skull at the top and electroformed with fluorite crystals. According to believes, the stone opens pathways in the brain to the higher dimensions of light. It increases alertness and mental activity and also helps in grasping complex and abstract concepts. The power of fluorite brings in objectivity and concise, orderly thoughts, actions and behavior. It encourages truth, understanding and wisdom.
(11 images)
* Featured Page *
|
|
got these three pieces finished around the same time, so i thought i'd post em together... the zombie bone inline, a bubbler with a dome i electroformed, and a teapot percolator that i blasted with a boston tea party theme!had fun with all three of these...
(17 images)
|
|
All the things of the universe are joined with you who smoke the pipe — All send their voices to Wakan- Tanka the Great Spirit. When you pray with this pipe, you pray for and with everything.
~Black Elk The Sacred Pipe (1953)~
this peace pipe tomahawk is 22 inches long. with mock elk antler style bowl, obsidian blade, and wood grain. electroformed with quartz and turquoise, and a touch of leather work too. the stand was made by my buddy nick.
(7 images)
* Featured Page *
|
|
just a couple of simple spoons. they're about two inches long. made one for a friend who's visiting from out of town. the other one for fun... thanks for looking
(9 images)
|
|
heres a bubb with some new tech for me! double layer sleeved graal....really having fun with this new style and starting to figure out some tricks for it....sand blasted with a 70's wall paper theme then sleeved. stands about 8 inches tall...
(7 images)
|
|
dome and nail bubb stands 15 inches tall. double layer wig wags over basket weave sections, and then electroformed.
(20 images)
|
|
so heres a little inline about 9 inches long. been working on my sculpting again, and had some great tips/ suggestions from AKM....thanks homey! used amazon night and blasted a zombie on the side disc.
(12 images)
* Featured Page *
|
|
|
Hey thanks for checking out my work. I've been blowing glass since late 2002 early 2003. Mainly in Richmond, VA. Though I'm part of small father and son business in Charlottesville, VA called Roots Rock Reggae. Some of my work plus other local artist's work can be found there.
<ELKSTHATRUN@GMAIL.COM>
ElksThatRun Charlottesville VA http://www.myspace.com/elksthatrun
|
Comments
|
|
Browse by Category
|